This Product Has Been Discontinued
Let’s Help you Find What you are Looking For – Click Here
HHC-200 200W FULL FUNCTION LIGHT & SIREN CONTROLLER (HAND-HELD)
SIRENS AND SPEAKERS
Product Number: OP-53O2
GENERAL SPECIFICATIONS:
• Siren Standby Current: Less than 150mA
• Siren Frequency: 725Hz – 1587Hz
• Operating Temp: -25° to 60°(-15°F to + 140°F)
• Dimensions: HH Controller: 5.5″L x 2.2″W x 1.3″D
Amplifier: 8.2″W x 7.4″D x 2.72″H
• Light Controls: 3 progressive push buttons & 4 on/off
• Light Output Ratings: 10A fuse on each of the 8 outputs. (LV – 3 push buttons & SW – 4 push buttons)
• Siren Connections: Positive x 2, Negative x 2, Speaker x 2, Radio x 2, Enable, Park Kill, Horn Ring Transfer, Video Camera Trigger
• Removable 12 terminal block (Also location for video output)
• Light Control Connections: Power In 2-position screw terminal inputs
LV1, LV2, LV3 (push buttons) 3-position screw terminal outputs
SW1, SW2, SW3, SW4 (push buttons) 5-position screw terminal outputs
FEATURES:
• For use with one or two 100W siren speakers
• Noise canceling microphone
• LED back-lit buttons show green when off, red when activated / on
• 260 adhesive button titles
• Quick disconnect block plugs promote ease of service and / or replacement
• Momentary push-button Horn switch
• Momentary push-button Manual/Tone toggle switch
• HRT input programmable for positive or negative operation
• Park Kill input programmable for positive or negative latching Park Kill operation
• Side DIP switch option selectors
• Compliance: Meets SAE J1849 & CA Title XIII, ECE R10
• Input Voltage: 11-16 VDC (negative ground)
• Siren Input Current: 8.5Amps (@13.6VDC – single 100W speaker) 16 Amps (@13.6VDC – dual 100W speakers)
• Audio Frequency: 300Hz – 3kHz ± 3db
• Radio Output: 40 watts (@13.6VDC-single 100W speaker)
• Siren Output Power: 100 WATTS RMS MAX. (16VDC – single
100W speaker)
• Siren Output Power: 200 WATTS RMS MAX. (16VDC – dual
100W speakers)
